Show Ospf3 Database - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show ospf3 database

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show ospf3 database
<brief | detail | extensive | summary>
<advertising-router (address | self)>
<area area-id>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link>
<link-local>
<logical-system (all | logical-system-name)>
<lsa-id lsa-id>
<network>
<nssa>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
show ospf3 database
<brief | detail | extensive | summary>
<advertising-router (address | self)>
<area area-id>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link>
<link-local>
<lsa-id lsa-id>
<network>
<nssa>
<router>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
realm
(
advertising-router address
advertising-router ( address
switches.
Display the entries in the Open Shortest Path First version 3 (OSPFv3) link-state database,
which contains data about link-state advertisement (LSA) packets.
none —Display standard information about all entries in the OSPFv3 link-state database.
brief | detail | extensive | summary
advertising-router (address | self)
particular routing device or by this routing device.
Chapter 80: Operational Commands for Layer 3 Protocols
| ) option introduced in Junos Relase 9.5.
self
| self ) option introduced in Junos OS Release 9.5 for EX Series
—(Optional) Display the specified level of output.
—(Optional) Display the LSAs advertised either by a
2361