Show Route Extensive - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route exact
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route exact show route exact
show route exact detail
Copyright © 2010, Juniper Networks, Inc.
show route exact destination-prefix
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route exact destination-prefix
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display only the routes that exactly match the specified address or range of addresses.
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
destination-prefix —Address or range of addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route exact on page 2435
show route exact detail on page 2435
show route exact extensive on page 2437
show route exact terse on page 2437
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route exact 207.17.136.0/24
inet.0: 24 destinations, 25 routes (23 active, 0 holddown, 1 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
207.17.136.0/24 *[Static/5] 2d 03:30:22
> to 192.168.71.254 via fxp0.0
user@host> show route exact 207.17.136.0/24 detail
inet.0: 24 destinations, 25 routes (23 active, 0 holddown, 1 hidden)
Restart Complete
207.17.136.0/24 (1 entry, 1 announced)
*Static Preference: 5
Next-hop reference count: 29
Next hop: 192.168.71.254 via fxp0.0, selected
State: <Active NoReadvrt Int Ext>
Local AS:
Age: 2d 3:30:26
Task: RT
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
69
2435