Show Isis Hostname; Table 306: Show Isis Hostname Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show isis hostname

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show isis hostname show isis hostname
Copyright © 2010, Juniper Networks, Inc.
show isis hostname
<logical-system (all | logical-system-name)>
show isis hostname
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Intermediate System-to-Intermediate System (IS-IS) hostname database
information.
—Display IS-IS hostname database information.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show isis hostname on page 2343
Table 306 on page 2343 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 306: show isis hostname Output Fields

Field Name
System Id
Hostname
Type
user@host> show isis hostname
IS-IS hostname database:
System Id Hostname
1921.6800.4201 isis1
1921.6800.4202 isis2
1921.6800.4203 isis3
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
Field Description
System identifier mapped to the hostname.
Hostname mapped to the system identifier.
Type of mapping between system identifier and hostname.
Dynamic —Hostname mapping determined as described in
RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS.
Static —Hostname mapping configured by user.
command.
show isis hostname
Type
Dynamic
Static
Dynamic
2343