Passive - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

passive

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2136
®
OS for EX Series Ethernet Switches, Release 10.4
passive;
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name protocols isis interface interface-name level
level-number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name level level-number],
[edit protocols isis interface interface-name],
[edit protocols isis interface interface-name level level-number],
[edit routing-instances routing-instance-name protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name level
level-number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Advertise the direct interface addresses on an interface or into a level on the interface
without actually running IS-IS on that interface or level.
This statement effectively prevents IS-IS from running on the interface. To enable IS-IS
on an interface, include the
routing-instances routing-instance-name protocols isis]
include the disable statement at those hierarchy levels. The three states are mutually
exclusive.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
disable
Configuring Levels on IS-IS Interfaces
statement at the
interface
or the
[edit protocols isis]
hierarchy level. To disable it,
Copyright © 2010, Juniper Networks, Inc.
[edit