Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2414

Complete Software Guide for Junos
Table 297: show bgp neighbor Output Fields (continued)
Field Name Field Description
Information about dropped path attributes:
Input dropped path
attributes
Information about ignored path attributes:
Input ignored path
attributes
Output queue Number of BGP packets that are queued to be transmitted to a particular neighbor for a particular
routing table. Output queue
Trace options Configured tracing of BGP protocol packets and operations.
Trace file Name of the file to receive the output of the tracing operation.
(
Filter Updates recv orf
NOTE: The counter is cumulative. For example, the counter is increased after the remote peer either
resends or clears the outbound route filtering prefix list.
(
Immediate orf
indicates that the BGP peer should readvertise the updated routes.
NOTE: The counter is cumulative. For example, the counter is increased after the remote peer either
resends or clears the outbound route filtering prefix list.
(
Filter orf
(
Received filter entries orf
(
seq orf
filter prefix entries.
(
prefix orf
(
minlength orf
maxlength ( orf
match ( orf
show bgp neighbor show bgp neighbor
(CLNS) (CLNS)
2310
®
OS for EX Series Ethernet Switches, Release 10.4
Code—Path attribute code.
Count—Path attribute count.
Code—Path attribute code.
Count—Path attribute count.
0 is for unicast NLRIs, and queue
option only) Number of outbound-route filters received for each configured address family.
option only) Number of route updates received with the immediate flag set. The immediate flag
option only) Type of prefix filter received:
option only) List of received filters displayed.
option only) Numerical order assigned to this prefix entry among all the received outbound route
option only) Address for the prefix entry that matches the filter.
option only) Minimum prefix length, in bits, required to match this prefix.
option only) Maximum prefix length, in bits, required to match this prefix.
option only) For this prefix match, whether to
user@host> show bgp neighbor
Peer: 10.245.245.1+179 AS 200
Type: External State: Established
Last State: OpenConfirm
Last Error: None
Options: <Multihop Preference LocalAddress HoldTime AddressFamily PeerAS
Rib-group Refresh>
1 is for multicast NLRIs.
or
prefix-based extended-community
permit or deny route updates.
Local: 10.245.245.3+3770 AS 100
Flags: <ImportEval Sync>
Last Event: RecvKeepAlive
Copyright © 2010, Juniper Networks, Inc.
.