Show Route Snooping - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route snooping

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route snooping show route snooping
detail detail
Copyright © 2010, Juniper Networks, Inc.
show route snooping
<brief | detail | extensive | terse>
<all>
<best address/prefix>
<exact address>
<range prefix-range>
<summary>
<table table-name>
Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the entries in the routing table that were learned from snooping.
—Display the entries in the routing table that were learned from snooping.
none
brief | detail | extensive | terse
not specify a level of output, the system defaults to
—(Optional) Display all entries, including hidden entries.
all
best address/prefix —(Optional) Display the longest match for the provided address and
optional prefix.
—(Optional) Display exact matches for the provided address and
exact address/prefix
optional prefix.
—(Optional) Display information for the provided address range.
range prefix-range
summary —(Optional) Display route snooping summary statisitics.
—(Optional) Display information for the named table.
table table-name
view
show route snooping detail on page 2505
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route snooping detail
__+domainAll__.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
224.0.0.2/32 (1 entry, 1 announced)
*IGMP Preference: 0
Next hop type: MultiRecv
Next-hop reference count: 4
State: <Active NoReadvrt Int>
Age: 2:24
Task: IGMP
Announcement bits (1): 0-KRT
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
.
brief
2505