Table 290: Show (Ospf | Ospf3) Route Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Required Privilege
Level
List of Sample Output
Output Fields

Table 290: show (ospf | ospf3) route Output Fields

Field Name Field Description
Name of the topology.
Topology
Destination of the route.
Prefix
How the route was learned:
Path type
Inter
Ext1
Ext2
Intra
The type of routing device from which the route was learned:
Route type
AS BR
Area BR
Area/AS BR
Network
Router
Transit
LAN, or nonbroadcast multiaccess (NBMA) link.
Discard
Next-hop type:
NH Type
Route's metric value.
Metric
(OSPFv3 only) Interface through which the route's next hop is reachable.
NH-interface
2284
®
OS for EX Series Ethernet Switches, Release 10.4
the option to specify an address family for OSPFv3 other than IPv6 unicast,
realm
which is the default.
router —(Optional) Display routes to all routers.
—(OSPF only) (Optional) Display routes for a particular topology.
topology topology-name
transit —(Optional) (OSPFv3 only) Display OSPFv3 routes to pseudonodes.
view
show ospf route on page 2285
show ospf route detail on page 2285
show ospf3 route on page 2286
show ospf3 route detail on page 2286
show ospf route topology voice on page 2287
Table 290 on page 2284 list the output fields for the
Output fields are listed in the approximate order in which they appear.
—Interarea route
—External type 1 route
—External type 2 route
—Intra-area route
—Route to AS border router
—Route to area border router
—Route to router that is both an
—Network router.
—Route to a router that is neither an
—(OSPFv3 only) Route to a pseudonode representing a transit network,
—Route to a summary discard.
or .
LSP IP
show (ospf | ospf3) route
Area BR and AS BR .
nor an .
Area BR AS BR
Copyright © 2010, Juniper Networks, Inc.
command.
Output Level
All levels
All levels
All levels
All levels
All levels
All levels
All levels