Keep - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

keep

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
keep (all | none);
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify whether routes learned from a BGP peer are retained in the routing table even if
they contain an AS number that was exported from the local AS.
If you do not include this statement, most routes are retained in the routing table.
—Retain all routes.
all
none —Retain none of the routes. When
the inbound policy changes, the Junos OS forces readvertisement of the full set of
routes advertised by the peer.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Applying Policies to BGP Routes
Chapter 79: Configuration Statements for Layer 3 Protocols
keep none is configured for the BGP session and
2073