Monitoring Ethernet Switching; Table 235: Ethernet Switching Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation

Monitoring Ethernet Switching

Purpose
Action
Meaning

Table 235: Ethernet Switching Output Fields

Field
Ethernet Switching Table Information
MAC Table Count
MAC Table Learned
Ethernet Switching Table Information
VLAN
MAC Address
Type
Age
Interfaces
MAC Learning Log
1628
®
OS for EX Series Ethernet Switches, Release 10.4
Creating a Private VLAN on a Single EX Series Switch (CLI Procedure) on page 1607
Creating a Private VLAN Spanning Multiple EX Series Switches (CLI Procedure)
Use the monitoring feature to view details that the EX Series switch maintains in its
Ethernet switching table. These are details about the nodes on the LAN such as VLAN
name, VLAN ID, member interfaces, MAC addresses, and so on.
To display Ethernet switching details in the J-Web interface, select
.
> Ethernet Switching
To view Ethernet switching details in the CLI, enter the following commands:
show ethernet-switching table
show vlans
show ethernet-switching interfaces
Table 235 on page 1628 summarizes the Ethernet switching output fields.
Value
The number of entries added to the Ethernet switching table.
The number of dynamically learned MAC addresses in the Ethernet switching table.
The VLAN name.
The MAC address associated with the VLAN. If a VLAN range has been configured for a
VLAN, the output displays the MAC addresses for the entire series of VLANs that were
created with that name.
The type of MAC address. Values are:
static —The MAC address is manually created.
—The MAC address is learned dynamically from a packet's source MAC address.
learn
—The MAC address is unknown and flooded to all members.
flood
The time remaining before the entry ages out and is removed from the Ethernet switching
table.
The associated interfaces.
Monitor > Switching
Copyright © 2010, Juniper Networks, Inc.