Hold-Time - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos

hold-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2046
®
OS for EX Series Ethernet Switches, Release 10.4
hold-time seconds;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the hold-time value to use when negotiating a connection with the peer. The
hold-time value is advertised in open packets and indicates to the peer the length of time
that it should consider the sender valid. If the peer does not receive a keepalive, update,
or notification message within the specified hold time, the BGP connection to the peer
is closed and routing devices through that peer become unavailable.
The hold time is three times the interval at which keepalive messages are sent.
—Hold time.
seconds
Range: 20 through 65,535 seconds
Default: 90 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Delay Before BGP Peers Mark the Routing Device as Down
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents