Show (Ospf | Ospf3) Statistics - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show (ospf | ospf3) neighbor
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
show (ospf | ospf3) neighbor
<brief | detail | extensive>
<area area-id>
<instance (all | instance-name)>
<interface interface-name>
<logical-system (all | logical-system-name)>
<neighbor>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) neighbor
<brief | detail | extensive>
<area area-id>
<instance (all | instance-name)>
<interface interface-name>
<neighbor>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
instance all option introduced in Junos OS Release 9.1.
option introduced in Junos OS Release 9.1 for EX Series switches.
instance all
area , interface , and realm options introduced in Junos OS Release 9.2.
and options introduced in Junos OS Release 9.2 for EX Series switches.
area interface
Display information about Open Shortest Path First (OSPF) neighbors.
none —Display standard information about all OSPF neighbors for all routing instances.
—(Optional) Display the specified level of output.
brief | detail | extensive
area area-id —(Optional) Display information about the OSPF neighbors for the specified
area.
instance (all | instance-name
instances or under the named routing instance.
interface interface-name —(Optional) Display information about OSPF neighbors for the
specified logical interface.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information about the specified OSPF neighbor.
neighbor
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
information about the OSPF neighbors for the specified OSPFv3 realm, or address
family. Use the option to specify an address family for OSPFv3 other than IPv6
realm
unicast, which is the default.
view
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display all OSPF interfaces for all routing
—(Optional) Perform this operation on all logical
—(Optional) (OSPFv3 only) Display
2273