Show Rip Neighbor; Table 316: Show Rip Neighbor Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show rip neighbor

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2382
®
OS for EX Series Ethernet Switches, Release 10.4
show rip neighbor
<instance (all | instance-name)>
<logical-system (all | logical-system-name)>
<name>
show rip neighbor
<instance (all | instance-name)>
<name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about Routing Information Protocol (RIP) neighbors.
—Display information about all RIP neighbors for all instances.
none
instance (all | instance-name)
or for only the specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display detailed information about only the specified RIP neighbor.
name
view
show rip neighbor on page 2383
Table 316 on page 2382 lists the output fields for the
fields are listed in the approximate order in which they appear.

Table 316: show rip neighbor Output Fields

Field Name
Neighbor
State
Source Address
Destination Address
Send Mode
Receive Mode
In Met
—(Optional) Display RIP neighbor information for all instances
—(Optional) Perform this operation on all logical
show rip neighbor
Field Description
Name of RIP neighbor.
State of the connection: or
Up
Source address.
Destination address.
Send options: broadcast , multicast
Type of packets to accept: both
Metric added to incoming routes when advertising into RIP routes
that were learned from other protocols.
command. Output
(Down).
Dn
, none , or version 1 .
, none , version 1 , or version 2 .
Copyright © 2010, Juniper Networks, Inc.