Version Summary; New Or Changed Information; Before You Install Nsm; Solaris Locales - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note

Network and Security Manager 2010.4 Release Notes

Version Summary

New or Changed Information

SRX Series Devices—Old Name
srx210-lm
srx210-hm
sxr210-poe
srx100-lm
srx100-hm
srx240-lm
srx240-hm
srx240-poe

Before You Install NSM

Solaris Locales

2
Juniper Networks Network and Security Manager (NSM) is a software application that
centralizes control and management of your Juniper Networks devices. With NSM, Juniper
Networks delivers integrated, policy-based security and network management for all
security devices and other Juniper Networks devices in your networks. NSM uses the
technology developed for Juniper Networks ScreenOS to enable and simplify management
support for previous and current versions of ScreenOS and now for the Junos operating
system (Junos OS). By integrating management of all Juniper Networks devices, NSM
enhances the overall security and manageability of the Internet gateway.
The following list provides the new or changed information for this release:
NSM supports the management of SRX Series devices in packet and mixed mode.
With the Junos OS Release 10.2 and later, the following devices from the SRX family
have been renamed:
Before installing NSM on a Solaris server, you must install a specific set of locales, and
make appropriate edits to the
and Security Manager Installation Guide.
SRX Series Devices—New Name
sxr210b
srx210h
srx210h-poe
srx100b
srx100h
srx240b
srx240h
srx240h-poe
/etc/default/init file. For more information, see the Network
Copyright © 2010, Juniper Networks, Inc.