Dot1Q-Tunneling (Vlans) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

dot1q-tunneling (VLANs)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1656
®
OS for EX Series Ethernet Switches, Release 10.4
dot1q-tunneling {
customer-vlans (id | native | range);
layer2-protocol-tunneling all | protocol-name {
drop-threshold number;
shutdown-threshold number;
}
}
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option introduced in Junos OS Release 9.6 for EX Series switches.
native
Options layer2-protocol-tunneling
in Junos OS Release 10.0 for EX Series switches.
Enable Q-in-Q tunneling on the specified VLAN.
NOTE: The VLAN on which you enable Q-in-Q tunneling must be a tagged
VLAN.
The remaining statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
dot1q-tunneling on page 1655
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1568
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1592
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1608
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
, drop-threshold , and shutdown-threshold
Copyright © 2010, Juniper Networks, Inc.
introduced