backup-pe-group
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
backup-pe-group group-name {
backups [ addresses ];
local-address address;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced in Junos OS Release 9.0.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure a backup provider edge (PE) group for ingress PE redundancy when
point-to-multipoint label-switched paths (LSPs) are used for multicast distribution.
group-name
—Name of the group for PE backups.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Ingress PE Redundancy
Chapter 79: Configuration Statements for Layer 3 Protocols
1969