Static - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

static

Syntax
Hierarchy Level
Release Information
Copyright © 2010, Juniper Networks, Inc.
static {
defaults {
static-options;
}
rib-group group-name;
route destination-prefix {
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
local-address ip-address;
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
minimum-receive-ttl number;
multiplier number;
neighbor address;
no-adaptation;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
version (1 | automatic);
}
next-hop address;
next-hop options;
qualified-next-hop address {
metric metric;
preference preference;
}
static-options;
}
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options],
[edit routing-options rib routing-table-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for BFD authentication introduced in Junos 9.6.
Support for BFD authentication introduced in Junos 9.6 for EX Series switches.
Chapter 79: Configuration Statements for Layer 3 Protocols
2197