Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2317

Copyright © 2010, Juniper Networks, Inc.
—Synchronization between IS-IS and LDP
ldp-synchronization
—Link-state PDU packets
lsp
—Link-state PDU generation packets
lsp-generation
—All IS-IS protocol packets
packets
psn —Partial sequence number PDU (PSNP) packets
—Shortest-path-first calculations
spf
Global Tracing Flags
—All tracing operations
all
general —A combination of the
—All normal operations, including adjacency changes
normal
Default: If you do not specify this option, only unusual or abnormal operations are traced.
—Policy operations and actions
policy
route —Routing table changes
—State transitions
state
—Routing protocol task processing
task
—Routing protocol timer processing
timer
—(Optional) Modifier for the tracing flag. You can specify one or more of
flag-modifier
these modifiers:
detail —Detailed trace information
—Packets being received
receive
send —Packets being transmitted
—(Optional) Prevent any user from reading the log file.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named
. When the
trace-file.0 trace-file
trace-file.1 and trace-file
until the maximum number of trace files is reached. Then, the oldest trace file is
overwritten.
Note that if you specify a maximum file size, you also must specify a maximum
number of trace files with the
Syntax: to specify KB,
xk xm
Range: 10 KB through the maximum file size supported on your system
Default: 128 KB
—(Optional) Allow any user to read the log file.
world-readable
Chapter 79: Configuration Statements for Layer 3 Protocols
normal and route trace operations
trace-file
again reaches its maximum size,
is renamed trace-file.0 . This renaming scheme continues
option.
files
to specify MB, or to specify GB
xg
reaches this size, it is renamed
is renamed
trace-file.0
2213