Mesh-Group - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

mesh-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2092
®
OS for EX Series Ethernet Switches, Release 10.4
mesh-group (blocked | value);
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an interface to be part of a mesh group, which is a set of fully connected nodes.
—Configure the interface so that it does not flood link-state PDU packets.
blocked
—Number that identifies the mesh group.
value
Range: 1 through 4,294,967,295 (2
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Mesh Groups of IS-IS Interfaces
32
– 1; 32 bits are allocated to identify a mesh group)
Copyright © 2010, Juniper Networks, Inc.