No-Client-Reflect - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

no-client-reflect

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2116
®
OS for EX Series Ethernet Switches, Release 10.4
no-client-reflect;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Disable intracluster route redistribution by the system acting as the route reflector. Include
this statement when the client cluster is fully meshed to prevent the sending of redundant
route advertisements.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
cluster on page 1996
Configuring BGP Route Reflection
Copyright © 2010, Juniper Networks, Inc.