Troubleshooting Interface Configuration And Cable Faults; Interface Configuration Or Connectivity Is Not Working - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Troubleshooting Interface Configuration and Cable Faults

Interface Configuration or Connectivity Is Not Working

Problem
Solution
Related
Documentation
1356
®
OS for EX Series Ethernet Switches, Release 10.4
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch on
page 940
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between
an EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution
Switch on page 947
Troubleshooting interface configuration and connectivity on the EX Series switch:
1. Interface Configuration or Connectivity Is Not Working on page 1356
You encounter errors when you attempt to configure an interface on the switch, or the
interface is exhibiting connectivity problems.
Use the port troubleshooter feature in the J-Web interface to identify and rectify port
configuration and connectivity related problems.
To use the J-Web interface port troubleshooter:
Select the option Troubleshoot
1.
Click
2. Troubleshoot Port
Select the ports to troubleshoot.
3.
Select the test cases to be executed on the selected port. Click
4.
When the selected test cases are executed, the final result and the recommended
action is displayed.
If there is a cable fault, the port troubleshooter displays details and the recommended
action. For example, the cable must be replaced.
If the port configuration needs to be modified, the port troubleshooter displays details
and the recommended action.
Monitoring Interface Status and Traffic on page 1345
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 1287
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 199
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 201
from the main menu.
. The Port Troubleshooting wizard is displayed. Click
Next
Next .
Copyright © 2010, Juniper Networks, Inc.
.