Gvrp - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

gvrp

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1664
®
OS for EX Series Ethernet Switches, Release 10.4
gvrp {
interface [interface-name] {
disable;
}
join-timer milliseconds;
leave-timer milliseconds;
leaveall-timer milliseconds;
}
[edit protocols]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
NOTE: As of Junos OS Release 9.2, GVRP can be enabled only on trunk
interfaces.
When GVRP is configured on a trunk interface, it ensures that the VLAN membership
information on the trunk interface is updated as the switch's access interfaces become
active or inactive in the configured VLANs.
The statements are explained separately.
GVRP is disabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show gvrp on page 1727
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1532
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
Copyright © 2010, Juniper Networks, Inc.