Primary-Vlan - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

primary-vlan

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
primary-vlan vlan-name;
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement updated with enhanced
Release 9.5 for EX Series switches.
Configure the primary VLAN for this private VLAN (PVLAN). The primary VLAN is always
tagged.
If the PVLAN is configured on a single switch, do not assign a tag to the community
VLANs.
If the PVLAN is configured to span multiple switches, you must assign tags to the
community VLANs also.
TIP: To display a list of all configured VLANs on the system, including VLANs
that are configured but not committed, type
configuration mode command line. Note that only one VLAN name is
displayed for a VLAN range.
system—To view this statement in the configuration.
system–control—To add this statement to the configuration.
Example: Configuring a Private VLAN on a Single EX Series Switch on page 1571
Example: Configuring a Private VLAN Spanning Multiple EX Series Switches
Creating a Private VLAN on a Single EX Series Switch (CLI Procedure) on page 1607
Creating a Private VLAN Spanning Multiple EX Series Switches (CLI Procedure)
Chapter 68: Configuration Statements for Bridging and VLANs
(CLI completion feature) functionality in Junos OS
?
after
?
or in your
vlan vlans
1689