Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2405

Table 296: show bgp group Output Fields (continued)
Field Name
Flaps
Table
Tot Paths
Act Paths
Suppressed
History
Damp State
Pending
Group
Receive mask
Entries
Target
Mask
show bgp group show bgp group
Copyright © 2010, Juniper Networks, Inc.
Field Description
Total number of flaps that occurred.
Name of a routing table.
Total number of paths.
Number of active routes.
Number of routes currently inactive because of damping or other
reasons. These routes do not appear in the forwarding table and are
not exported by routing protocols.
Number of withdrawn routes stored locally to keep track of damping
history.
Number of active routes with a figure of merit greater than zero, but
lower than the threshold at which suppression occurs.
Routes being processed by BGP import policy.
Group the peer belongs to in the BGP configuration.
Mask of the received target included in the advertised route.
Number of route entries received.
Route target that is to be passed by route-target filtering. If a route
advertised from the provider edge (PE) routing device matches an
entry in the route-target filter, the route is passed to the peer.
Mask which specifies that the peer receive routes with the given
route target.
user@host> show bgp group
Group Type: Internal
Name: from_vpn04_to_other Index: 0
Holdtime: 0
Total peers: 3
10.255.14.178+179
10.255.71.24+179
10.255.14.182+179
inet.0: 2/7/0
Group Type: External
Name: from_vpn04_to_vpn06 Index: 1
Export: [ internal-and-bgp ]
Holdtime: 0
Traffic Statistics Interval: 300
Total peers: 1
Chapter 80: Operational Commands for Layer 3 Protocols
AS: 21
Established: 3
Established: 1
Level of
Output
All levels
brief , none
brief , none
brief , none
brief , none
, none
brief
brief , none
, none
brief
detail
detail
detail
detail
detail
Local AS: 21
Flags: <>
Local AS: 21
Flags: <Export Eval>
2301