Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2278

Complete Software Guide for Junos
Default
Options
Required Privilege
Level
Related
Documentation
2174
®
OS for EX Series Ethernet Switches, Release 10.4
NOTE: The IPv4 multicast routing table (
table ( ) are not supported for this statement.
inet6.1
If you do not specify a routing table name with the
software uses the default routing tables, which are
the multicast cache.
—Name of the routing table, in the following format:
routing-table-name
protocol [ .identifier ]
is the protocol family. It can be
protocol
for the ISO protocol family, or
iso
identifier is a positive integer that specifies the instance of the routing table.
Default:
inet.0
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
passive
Creating Routing Tables
inet.1 ) and the IPv6 multicast routing
routing-table-name
for unicast routes and
inet.0
for the IPv6 family,
inet6
for an ISO routing instance.
instance-name.iso.0
Copyright © 2010, Juniper Networks, Inc.
statement, the
for
inet.1
for the IPv4 family,
inet