Complete Software Guide for Junos
show ripng neighbor
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2388
®
OS for EX Series Ethernet Switches, Release 10.4
show ripng neighbor
<logical-system (all | logical-system-name)>
<name>
show ripng neighbor
<name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about Routing Information Protocol next-generation (RIPng)
neighbors.
—Display information about all RIPng neighbors.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display detailed information about a specific RIPng neighbor.
name
view
show ripng neighbor on page 2389
Table 319 on page 2388 lists the output fields for the
fields are listed in the approximate order in which they appear.
Table 319: show ripng neighbor Output Fields
Field Name
Neighbor
State
Source Address
Destination Address
Send Mode
Receive Mode
In Met
—(Optional) Perform this operation on all logical
show ripng neighbor
Field Description
Name of RIPng neighbor.
State of the connection:
or
Up
Source address.
Destination address.
Send options:
,
broadcast
multicast
Type of packets to accept:
both
Metric added to incoming routes when advertising into RIPng routes
that were learned from other protocols.
command. Output
(Down).
Dn
,
,
, or
none
version 1
yes.
,
,
, or
none
version 1
yes.
Copyright © 2010, Juniper Networks, Inc.