Link-Protection - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

link-protection

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2076
®
OS for EX Series Ethernet Switches, Release 10.4
link-protection;
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name]
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable link protection on the specified IS-IS interface. The Junos OS creates a backup
loop-free alternate path to the primary next hop for all destination routes that traverse
the protected interface.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
node-link-protection on page 2126
Configuring Loop-Free Alternate Routes for IS-IS
Copyright © 2010, Juniper Networks, Inc.