Preempt-Cutover-Timer - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

preempt-cutover-timer

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1688
®
OS for EX Series Ethernet Switches, Release 10.4
preempt-cutover-timer seconds;
[edit ethernet-switching-options redundant-trunk-group name name]
Statement introduced in Junos OS Release 10.4 for EX Series switches.
Change the length of time that a re-enabled primary link waits to take over from an active
secondary link in a redundant trunk group.
If you do not change the time with the preempt-cutover-timer statement, a re-enabled
primary link takes over from the active secondary link after 120 seconds.
—Number of seconds that the primary link waits to take over from the active
seconds
secondary link.
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Example: Configuring Redundant Trunk Links for Faster Recovery on page 1563
Configuring Redundant Trunk Links for Faster Recovery (CLI Procedure)
Copyright © 2010, Juniper Networks, Inc.