Show Route Resolution - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show route resolution

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
2502
®
OS for EX Series Ethernet Switches, Release 10.4
show route resolution
<brief | detail | extensive | summary>
<index index>
<logical-system (all | logical-system-name)>
<prefix>
<table routing-table-name>
<unresolved>
show route resolution
<brief | detail | extensive | summary>
<index index>
<prefix>
<table routing-table-name>
<unresolved>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the entries in the next-hop resolution database. This database provides for
recursive resolution of next hops through other prefixes in the routing table.
none —Display standard information about all entries in the next-hop resolution database.
brief | detail | extensive | summary
index index —(Optional) Show the index of the resolution tree.
logical-system (all | logical-system-name)
systems or on a particular logical system.
prefix network/destination-prefix
address.
table routing-table-name —(Optional) Display information about a particular routing table
(for example, inet.0 ) where policy-based export is currently enabled. (For information
about the different types of routing tables, see the Junos Routing Protocols
Configuration Guide.)
unresolved —(Optional) Display routes that could not be resolved.
view
show route resolution detail on page 2503
show route resolution summary on page 2504
show route resolution unresolved on page 2504
—(Optional) Display the specified level of output.
—(Optional) Perform this operation on all logical
—(Optional) Display database entries for the specified
Copyright © 2010, Juniper Networks, Inc.