Rib-Group - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

rib-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2178
®
OS for EX Series Ethernet Switches, Release 10.4
rib-group group-name;
[edit logical-systems logical-system-name protocols (ospf | ospf3)],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit protocols (ospf | ospf3)],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series
switches.
Install routes learned from OSPF routing instances into routing tables in the OSPF routing
table group.
group-name —Name of the routing table group.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
interface-routes on page 2067
rib-group on page 2180
Creating Routing Table Groups
Configuring How Interface Routes Are Imported into Routing Tables
Enabling Multiprotocol BGP
Copyright © 2010, Juniper Networks, Inc.