Outbound-Route-Filter - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

outbound-route-filter

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
outbound-route-filter {
bgp-orf-cisco-mode;
prefix-based {
accept {
(inet | inet6);
}
}
}
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name neighbor
address]
Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 9.2 for EX Series switches.
Configure a BGP peer to accept outbound route filters from a remote peer.
—Specify that outbound route filters from a BGP peer be accepted.
accept
—Specify that IPv4 prefix-based outbound route filters be accepted.
inet
—Specify that IPv6 prefix-based outbound route filters be accepted.
inet6
NOTE: You can specify that both IPv4 and IPv6 outbound route filters be
accepted.
—Specify that prefix-based filters be accepted.
prefix-based
The bgp-orf-cisco-mode statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Chapter 79: Configuration Statements for Layer 3 Protocols
2131