Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1991

show spanning-tree interface
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show spanning-tree interface
<brief | detail>
<interface-name interface-name>
<msti msti-id>
<vlan-id vlan-id>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the configured or calculated interface-level spanning-tree protocol (can be either
STP, RSTP, or MSTP) parameters. In
administratively disabled or do not have a physical link.
none —(Optional) Display brief STP interface information.
—(Optional) Display the specified level of output.
brief | detail
interface-name interface-name
—(Optional) Display STP bridge information for the specified MSTP instance
msti msti-id
ID or Common and Internal Spanning Tree (CIST). Specify
from through for an MSTI.
1 4094
vlan-id vlan-id —(Optional) For MSTP interfaces, display interface information for the
specified VLAN. Specify a value from
view
show spanning-tree bridge on page 1878
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Understanding STP for EX Series Switches on page 1751
Understanding RSTP for EX Series Switches on page 1753
Understanding MSTP for EX Series Switches on page 1755
Understanding VSTP for EX Series Switches on page 1760
show spanning-tree interface on page 1888
show spanning-tree interface brief on page 1889
show spanning-tree interface detail on page 1889
show spanning-tree interface ge-1/0/0 on page 1890
Table 264 on page 1888 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 75: Operational Commands for Spanning-Tree Protocols
mode, will not display interfaces that are
brief
—(Optional) Name of an interface.
through
0 4094
show spanning-tree Interface
0 for CIST. Specify a value
.
command.
1887