Show Ripng General-Statistics; Table 318: Show Ripng General-Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show ripng general-statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show ripng show ripng
general-statistics general-statistics
Copyright © 2010, Juniper Networks, Inc.
show ripng general-statistics
<logical-system (all | logical-system-name)>
show ripng general-statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display general Routing Information Protocol next-generation (RIPng) statistics.
—Display general RIPng statistics.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear ripng general-statistics on page 2262
show ripng general-statistics on page 2387
Table 318 on page 2387 lists the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 318: show ripng general-statistics Output Fields

Field Name
bad msgs
no recv intf
curr memory
max memory
user@host> show ripng general-statistics
RIPng I/O info:
bad msgs :
no recv intf :
curr memory :
max memory :
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show ripng general-statistics
Field Description
Number of invalid messages received.
Number of packets received with no matching interface.
Amount of memory currently used by RIPng.
Most memory used by RIPng.
0
0
0
0
command.
2387