Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2343

For ex series ethernet switches
Table of Contents

Advertisement

Options
Copyright © 2010, Juniper Networks, Inc.
OSPF LSA database and sync the new database with the master Routing Engine. You
can also use the
command with any of the options to discard rather than delete
purge
the specified LSA entries.
CAUTION: This command is useful only for testing. Use it with care, because
it causes significant network disruption.
—Delete all LSAs other than the system's own LSAs, which are regenerated. To
none
resynchronize the database, the system destroys all adjacent neighbors that are in
the state
or higher. The neighbors are then reacquired and the databases
EXSTART
are synchronized.
advertising-router (router-id | self)
by the specified routing device or by this routing device.
area area-id
—(Optional) Discard entries for the LSAs in the specified area.
—(Optional) Discard summary AS boundary router LSA entries.
asbrsummary
external
—(Optional) Discard external LSAs.
—(Optional) Delete or discard entries for the specified routing
instance instance-name
instance only.
inter-area-prefix
—(OSPFv3 only) (Optional) Discard interarea prefix LSAs.
—(OSPFv3 only) (Optional) Discard interarea router LSAs.
inter-area-router
intra-area-prefix
—(OSPFv3 only) (Optional) Discard intra-area prefix LSAs.
logical-system (all | logical-system-name)
systems or on a particular logical system.
link-local
—(Optional) Delete link-local LSAs.
—(Optional) Discard the LSA entries with the specified LSA identifier.
lsa-id lsa-id
netsummary
—(Optional) Discard summary network LSAs.
—(Optional) Discard network LSAs.
network
nssa
—(Optional) Discard not-so-stubby area (NSSA) LSAs.
—(Optional) Discard opaque area-scope LSAs.
opaque-area
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
the entries for the specified OSPFv3 realm, or address family. Use the
to specify an address family for OSPFv3 other than IPv6 unicast, which is the default.
router
—(Optional) Discard router LSAs.
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Discard entries for the LSA entries advertised
—(Optional) Perform this operation on all logical
—(OSPFv3 only) (Optional) Delete
option
realm
2239

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents