Configuring Mvrp Registration Mode - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Configuring MVRP Registration Mode

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[edit protocols mvrp]
user@switch# set interface xe-0/0/1.0 300
To set the leave timer for all interfaces on the switch:
[edit protocols mvrp]
user@switch# set interface all leave-timer 1200
To set the leave timer for a specific interface:
[edit protocols mvrp]
user@switch# set interface xe-0/0/1.0 leave-timer 1200
To set the leaveall timer for all interfaces on the switch:
[edit protocols mvrp]
user@switch# set interface all leaveall-timer 12000
To set the leaveall timer for a specific interface:
[edit protocols mvrp]
user@switch# set interface xe-0/0/1.0 leaveall-timer 12000
The default MVRP registration mode for any interface participating in MVRP is normal.
An interface in normal registration mode participates in MVRP when MVRP is enabled
on the switch.
An interface in forbidden registration mode does not participate in MVRP even if MVRP
is enabled on the switch.
To set all interfaces to forbidden registration mode:
[edit protocols mvrp]
user@switch# set interface all registration forbidden
To set one interface to forbidden registration mode:
[edit protocols mvrp]
user@switch# set interface xe-0/0/1.0 registration forbidden
To set all interfaces to normal registration mode:
[edit protocols mvrp]
user@switch# set interface all registration normal
To set one interface to normal registration mode:
[edit protocols mvrp]
user@switch# set interface xe-0/0/1.0 registration normal
Example: Configuring Automatic VLAN Administration Using MVRP on EX Series
Switches on page 1580
Verifying That MVRP Is Working Correctly on page 1630
Chapter 65: Configuring Bridging and VLANs
1613