Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1846
®
OS for EX Series Ethernet Switches, Release 10.4
interface interface-name {
disable;
cost cost;
edge;
mode mode;
no-root-port;
priority priority;
}
[edit protocols mstp],
[edit protocols mstp msti msti-id],
[edit protocols rstp],
[edit protocols stp],
[edit protocols vstp vlan vlan-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
For Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), VLAN Spanning
Tree Protocol (VSTP), or Multiple Spanning Tree Protocol (MSTP), configure an interface.
The edge , mode , and no-root-port
] hierarchy level.
msti msti-id
interface-name —Name of a Gigabit Ethernet interface.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1878
show spanning-tree interface on page 1887
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1761
Understanding MSTP for EX Series Switches on page 1755
Understanding RSTP for EX Series Switches on page 1753
Understanding STP for EX Series Switches on page 1751
Understanding VSTP for EX Series Switches on page 1760
options are not available at the [
Copyright © 2010, Juniper Networks, Inc.
edit protocols mstp