Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2629

show route table mpls
show route table mpls
extensive
show route table
mpls.0
Copyright © 2010, Juniper Networks, Inc.
*[LDP/9] 00:50:14
Discard
user@host> show route table mpls
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 00:13:55, metric 1
Receive
1 *[MPLS/0] 00:13:55, metric 1
Receive
2 *[MPLS/0] 00:13:55, metric 1
Receive
1024 *[VPN/0] 00:04:18
to table red.inet.0, Pop
user@host> show route table mpls extensive
100000 (1 entry, 1 announced)
TSI:
KRT in-kernel 100000 /36 -> {so-1/0/0.0}
*LDP Preference:
Next hop:
Pop
State: <Active Int>
Age: 29:50
Task: LDP
Announcement bits (1): 0-KRT
AS path: I
Prefixes bound to route: 10.0.0.194/32
user@host> show route table mpls.0
mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 00:45:09, metric 1
Receive
1 *[MPLS/0] 00:45:09, metric 1
Receive
2 *[MPLS/0] 00:45:09, metric 1
Receive
100000 *[L2VPN/7] 00:43:04
> via so-0/1/0.1, Pop
100001 *[L2VPN/7] 00:43:03
> via so-0/1/0.2, Pop
100002 *[LDP/9] 00:43:22, metric 1
via so-0/1/2.0, Pop
> via so-0/1/3.0, Pop
100002(S=0) *[LDP/9] 00:43:22, metric 1
via so-0/1/2.0, Pop
> via so-0/1/3.0, Pop
100003 *[LDP/9] 00:43:22, metric 1
> via so-0/1/2.0, Swap 100002
via so-0/1/3.0, Swap 100002
100004 *[LDP/9] 00:43:16, metric 1
via so-0/1/2.0, Swap 100049
> via so-0/1/3.0, Swap 100049
so-0/1/0.1 *[L2VPN/7] 00:43:04
> via so-0/1/2.0, Push 100001, Push 100049(top)
via so-0/1/3.0, Push 100001, Push 100049(top)
so-0/1/0.2 *[L2VPN/7] 00:43:03
Chapter 80: Operational Commands for Layer 3 Protocols
9
via so-1/0/0.0, selected
Metric: 1
Offset: 4
2525