Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2093

Required Privilege
Level
Related
Documentation
bgp
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
—Specify for BFD sessions not to adapt to changing network conditions.
no-adaptation
We recommend that you not disable BFD adaptation unless it is preferable not to
have BFD adaptation enabled in your network.
transmit-interval threshold milliseconds
transmit interval adapts to a value greater than the threshold, a single trap and a
single system log message are sent. The interval threshold must be greater than the
minimum transmit interval.
Range: 0 through 4,294,967,295
transmit-interval minimum-interval milliseconds
the local routing device transmits hello packets to a neighbor with which it has
established a BFD session.
Range: 1 through 255,000
—Configure the BFD protocol version to detect.
version
Range: 1 or automatic
Default: automatic (autodetect the BFD protocol version)
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Bidirectional Forwarding Detection
Configuring BFD Authentication for Static Routes
bgp { ... }
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit protocols],
[edit routing-instances routing-instance-name protocols]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable BGP on the routing device or for a routing instance.
BGP is disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling BGP
Chapter 79: Configuration Statements for Layer 3 Protocols
—Configure a threshold. When the BFD session
—Configure the minimum interval at which
1989