Table 294: Show As-Path Summary Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
show as-path summary
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show as-path show as-path
summary summary
2296
®
OS for EX Series Ethernet Switches, Release 10.4
show as-path summary
<logical-system (all | logical-system-name)>
show as-path summary
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display autonomous system (AS) path summary information.
—(Optional) Display AS path summary information for all routing instances.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show as-path summary on page 2296
Table 294 on page 2296 lists the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 294: show as-path summary Output Fields

Field Name
AS Path
Buckets
Max
Min
Avg
Std deviation
user@host> show as-path summary
AS Paths Buckets Max
30425 1024 95
—(Optional) Perform this operation on all logical
show as-path summary
Field Description
AS path number.
Bucket value. This value represents a traffic classification on the
interface.
Maximum limit for the number of AS numbers.
Minimum limit for the number of AS numbers.
Average number of AS numbers.
Standard deviation for the number of AS numbers.
Min Avg Std deviation
12 29 6.481419
command.
Copyright © 2010, Juniper Networks, Inc.