Disable-Timeout - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

disable-timeout

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1840
®
OS for EX Series Ethernet Switches, Release 10.4
disable-timeout timeout;
[edit ethernet-switching-options bpdu-block]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
For interfaces configured for BPDU protection, specify the amount of time an interface
receiving BPDUs is disabled.
The disable timeout is not enabled.
—Amount of time, in seconds, the interface receiving BPDUs is disabled. Once
timeout
the timeout expires, the interface is brought back into service.
Range: 10 through 3600 seconds
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
show spanning-tree bridge on page 1878
show spanning-tree interface on page 1887
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1761
Example: Configuring BPDU Protection on non-STP Interfaces to Prevent STP
Miscalculations on EX Series Switches on page 1799
Understanding BPDU Protection for STP, RSTP, and MSTP on EX Series Switches on
page 1756
Copyright © 2010, Juniper Networks, Inc.