Show Rip Statistics; Table 317: Show Rip Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show rip statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 317: show rip statistics Output Fields

Field Name Field Description
RIP info Information about RIP on the specified interface:
2384
®
OS for EX Series Ethernet Switches, Release 10.4
show rip statistics
<instance (all | instance-name)>
<logical-system (all | logical-system-name)>
show rip statistics
<instance (all | instance-name)>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Routing Information Protocol (RIP) statistics about messages sent and received
on an interface, as well as information received from advertisements from other routing
devices.
—Display RIP statistics for all routing instances.
none
instance (all | instance-name
the specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear rip statistics on page 2261
show rip statistics on page 2385
Table 317 on page 2384 lists the output fields for the
fields are listed in the approximate order in which they appear.
port —UDP port number used for RIP.
—Hold-down interval, in seconds.
holddown
—Number of routes learned through RIP.
rts learned
—Number of routes held down by RIP.
rts held down
—Number of received request packets that were dropped.
rqsts dropped
resps dropped —Number of received response packets that were dropped.
restart —Graceful restart status. Displayed when RIP is or has been in the process of graceful restart.
—(Optional) Display RIP statistics for all instances or for only
—(Optional) Perform this operation on all logical
show rip statistics
command. Output
Copyright © 2010, Juniper Networks, Inc.