Show Route Best - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route best

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route best show route best
Copyright © 2010, Juniper Networks, Inc.
show route best destination-prefix
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route best destination-prefix
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route in the routing table that is the best route to the specified address or
range of addresses. The best route is the longest matching route.
—Address or range of addresses.
destination-prefix
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route best on page 2405
show route best detail on page 2407
show route best extensive on page 2407
show route best terse on page 2408
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route best 10.255.70.103
inet.0: 24 destinations, 25 routes (23 active, 0 holddown, 1 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
10.255.70.103/32 *[OSPF/10] 1d 13:19:20, metric 2
> to 10.31.1.6 via ge-3/1/0.0
via so-0/3/0.0
inet.3: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
10.255.70.103/32 *[RSVP/7] 1d 13:20:13, metric 2
> via so-0/3/0.0, label-switched-path green-r1-r3
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/8 *[Direct/0] 2d 01:43:34
> via fxp2.0
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
2405