Show Ripng Statistics; Table 320: Show Ripng Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show ripng statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 320: show ripng statistics Output Fields

Field Name Field Description
RIPng info Information about RIPng on the specified interface:
port
holddown
rts learned
rts held down
rqsts dropped
resps dropped
restart
2390
®
OS for EX Series Ethernet Switches, Release 10.4
show ripng statistics
<logical-system (all | logical-system-name)>
<name>
show ripng statistics
<name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Routing Information Protocol next generation (RIPng) statistics about messages
sent and received on an interface, as well as information received from advertisements
from other routing devices.
—Display RIPng statistics for all neighbors.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
name —(Optional) Display detailed information about a specific RIPng neighbor.
view
clear ripng statistics on page 2263
show ripng statistics on page 2391
Table 320 on page 2390 lists the output fields for the
fields are listed in the approximate order in which they appear.
—UDP port number used for RIP.
—Hold-down interval, in seconds.
—Number of routes learned through RIP.
—Number of routes held down by RIP.
—Number of received request packets that were dropped.
—Number of received response packets that were dropped.
—Graceful restart status. Displayed when RIPng is or has been in the process of graceful restart.
—(Optional) Perform this operation on all logical
show ripng statistics
Copyright © 2010, Juniper Networks, Inc.
command. Output