Stub - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

stub

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
stub <default-metric metric> <(no-summaries | summaries)>;
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit protocols (ospf | ospf3) area area-id],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series
switches.
Specify that this area not be flooded with AS external link-state advertisements (LSA)s.
You must include the
stub
stub area.
The backbone cannot be configured as a stub area.
You cannot configure an area to be both a stub area and a not-so-stubby area (NSSA).
no-summaries —(Optional) Do not advertise routes into the stub area. If you include the
option, only the default route is advertised.
default-metric
—(Optional) Flood summary LSAs into the stub area.
summaries
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
nssa on page 2127
Configuring OSPF Areas
Chapter 79: Configuration Statements for Layer 3 Protocols
statement when configuring all routing devices that are in the
2201