Hello-Authentication-Key - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

hello-authentication-key

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
hello-authentication-key password;
[edit logical-systems logical-system-name protocols isis interface interface-namelevel
number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name level number],
[edit protocols isis interface interface-name level number],
[edit routing-instances routing-instance-name protocols isis interface interface-name level
number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an authentication key (password) for hello packets. Neighboring routing devices
use the password to verify the authenticity of packets sent from an interface. For the key
to work, you also must include the
By default, hello authentication is not configured on an interface. However, if IS-IS
authentication is configured, the hello packets are authenticated using the IS-IS
authentication type and password.
—Authentication password. The password can be up to 255 characters.
password
Characters can include any ASCII strings. If you include spaces, enclose all characters
in quotation marks (" ").
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
authentication-key on page 1960
authentication-type on page 1964
hello-authentication-type on page 2040
Configuring Levels on IS-IS Interfaces
Chapter 79: Configuration Statements for Layer 3 Protocols
hello-authentication-type statement.
2039