Table 329: Show Route Flow Validation Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route flow validation
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 329: show route flow validation Output Fields

Field Name Field Description
routing-table-name Name of the routing table (for example,
prefix Route address.
Active unicast route Active route in the routing table.
Number of flows for which there are routes in the routing table.
Dependent flow
destinations
Origin Source of the route flow.
Copyright © 2010, Juniper Networks, Inc.
show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
<logical-system (all | logical-system-name)>
show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display flow route information.
none —Display flow route information.
—(Optional) Display the specified level of output. If you do not specify a level
brief | detail
of output, the system defaults to brief.
ip-prefix —(Optional) IP address for the flow route.
logical-system (all | logical-system-name)
systems or on a particular logical system.
table table-name —(Optional) Name of the flow route table.
view
show route flow validation on page 2454
Table 329 on page 2453 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show route flow validation
inet.0 ).
command.
Level of Output
All levels
All levels
All levels
All levels
All levels
2453