Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1668
®
OS for EX Series Ethernet Switches, Release 10.4
interface interface-name {
mapping (native (push | swap) | policy | tag (push | swap));
pvlan-trunk;
}
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option
mapping
introduced in Junos OS Release 9.6 for EX Series switches.
Option
introduced in Junos OS Release 10.0 for EX Series switches.
swap
Option
introduced in Junos OS Release 10.4 for EX Series switches.
pvlan-trunk
For a specific VLAN, configure an interface.
—Name of a Gigabit Ethernet interface.
interface-name
The remaining statement is explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1525
Configuring VLANs for EX Series Switches (CLI Procedure) on page 1600
Understanding Bridging and VLANs on EX Series Switches on page 1501
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents