Show Route Summary; Table 334: Show Route Summary Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route summary

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show route summary
<logical-system (all | logical-system-name)>
show route summary
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display summary statistics about the entries in the routing table.
—Display summary statistics about the entries in the routing table.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route summary on page 2520
Table 334 on page 2519 lists the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 334: show route summary Output Fields

Field Name Field Description
routing-table-name Name of the routing table (for example,
destinations Number of destinations for which there are routes in the routing table.
routes Number of routes in the routing table:
Routes on the directly connected network.
Direct
Local routes.
Local
Name of the protocol from which the route was learned. For example,
protocol-name
OSPF
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
active —Number of routes that are active.
holddown —Number of routes that are in the hold-down state before
being declared inactive.
—Number of routes not used because of routing policy.
hidden
, , and .
RSVP Static
command.
show route summary
inet.0 ).
2519