Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2248

Complete Software Guide for Junos
ppm
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2144
®
OS for EX Series Ethernet Switches, Release 10.4
ppm {
centralized;
}
[edit protocols lacp]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure PPM processing options for Link Aggregation Control Protocol (LACP) packets.
This command configures the PPM processing options for LACP packets only. You can
disable distributed PPM processing for all packets that use PPM and run all PPM
processing on the Routing Engine by entering the
statement in the
[edit routing-options ppm]
Distributed PPM processing is enabled for all packets that use PPM.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Distributed Periodic Packet Management on an EX Series Switch (CLI
Procedure) on page 1929
no-delegate-processing
statement hierarchy.
Copyright © 2010, Juniper Networks, Inc.
configuration