Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1709

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
To configure a series of tagged VLANs using the CLI (here, the VLAN is
Configure the series (here, a VLAN series from 120 through 130):
1.
[edit]
user@switch# set vlans employee vlan-range 120-130
Associate a series of tagged VLANs when you configure an interface in one of two
2.
ways:
Include the name of the series:
[edit interfaces]
user@switch# set interfaces ge-0/0/22.0 family ethernet-switching vlan members
employee
Include the VLAN range:
[edit interfaces]
user@switch# set interfaces ge-0/0/22.0 family ethernet-switching vlan members
120–130
Associating a series of tagged VLANS to an interface by name or by VLAN range have
the same result: VLANs
__employee_120__
NOTE: When a series of VLANs are created using the
the VLAN names are prefixed and suffixed with a double underscore.
Verifying That a Series of Tagged VLANs Has Been Created on page 1619
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1525
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1532
Example: Connecting an Access Switch to a Distribution Switch on page 1540
Understanding Bridging and VLANs on EX Series Switches on page 1501
Chapter 65: Configuring Bridging and VLANs
through
__employee_130__
vlan-range
):
employee
are created.
command,
1605