Show Route Protocol - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show route protocol

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
2482
®
OS for EX Series Ethernet Switches, Release 10.4
show route protocol protocol
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route protocol protocol
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
opsf2 and ospf3 options introduced in Junos OS Release 9.2.
and options introduced in Junos OS Release 9.2 for EX Series switches.
opsf2 ospf3
option introduced in Junos OS Release 10.0.
flow
flow option introduced in Junos OS Release 10.0 for EX Series switches.
Display the route entries in the routing table that were learned from a particular protocol.
protocol —Protocol from which the route was learned:
access —Access route for use by DHCP application
—Access-internal route for use by DHCP application
access-internal
aggregate —Locally generated aggregate route
—Asynchronous Transfer Mode virtual private network
atmvpn
bgp —Border Gateway Protocol
—Circuit cross-connect
ccc
direct —Directly connected route
—Distance Vector Multicast Routing Protocol
dvmrp
—End System-to-Intermediate System
esis
—Locally defined flow-specification route.
flow
—Intermediate System-to-Intermediate System
isis
—Label Distribution Protocol
ldp
—Layer 2 circuit
l2circuit
l2vpn —Layer 2 virtual private network
—Local address
local
mpls —Multiprotocol Label Switching
—Multicast Source Discovery Protocol
msdp
ospf —Open Shortest Path First versions 2 and 3
—Open Shortest Path First versions 2 only
ospf2
ospf3 —Open Shortest Path First version 3 only
Copyright © 2010, Juniper Networks, Inc.